How to add IP Camera in NVR ?

 Adding IP Camera in NVR

      In this we will discuss about how to add IP camera in NVR.





1. For Installation of NVR and IP cameras we need PoE switch and Ethernet Cables. If we use PoE switch then we don't need to connect separate power for the cameras. So its better to use PoE switch  other than connecting power supply for the cameras.

2. From PoE switch we have to connect Ethernet (known as cat6 or cat5e) cable to cameras and NVR.

3.From Uplink to NVR and PoE ports to cameras like that you have to connect.(Follow the below video Link).


 Video Link ------   How to connect IP camera in NVR


Comments

Post a Comment

Popular posts from this blog

UNIVIEW NVR AND IP CAMERA INSTALLATION

Image
How to add Onvif IP camera in UNIVIEW NVR ?                 In this we will discussing about how to add the Onvif IP camera in Uniview NVR. Here I am using one Uniview NVR and Hifocus IP Camera. I will explain the procedure below. Uniview NVR with Onvif IP Camera 1. First For Connecting IP Camera with NVR we need Ethernet or Lan cables and Switch. Its better to use PoE switches. So that we no need to connect separate power to the Camera. 2. Connect Ethernet cable from Switch Uplink to NVR and Switch PoE ports to cameras. (Please refer above video Link). 3. After the connection done, in NVR go to  Main Menu >> Camera  option, There camera will be searched. If not searching we have to add the camera manually. 4. Check What is the IP address searching there, and confirm whether both NVR and camera are are in same series. If not need to change camera IP address to NVR Series. For example NVR has IP 192.168.1.XXX then camera should...
Read more

How to solve Black and White issue in DVR

  How to solve Black and White issue in DVR ?    In many cases we have seen that our camera view is in black and white in day time also. So in this video I will tell you about how to solve that black and white problem and make that camera view in color. In that case you have to change mode to get color view. ·         Go to Settings >> camera >> Edit camera >> camera Signal . ·         Select the channel ·         Change DVR mode to your CAMERA mode & save. Here I am using TVT XVR and connecting Dahua camera. Just we have to change the mode to get color view. Either in camera or in DVR we can change. It's very easy to change from the DVR. Kindly Comment below if you have any doubts... For more technical details please visit below website. www.techsupportcctv.blogspot.com Please Subscribe my channel to get more technical Videos.. Thank you....
Read more